FEK-60EM電動式端子壓接機 ELECTRICAL TYPE TERMINAL CRIMPING MACHINE
■ 壓模可更換設計，可壓接多種類型的端子
■ 採用腳踏開關控制，適用中等批量端子的壓接
■ 便攜式和輕量型
■ The crimping dies are interchangeable for crimping different terminals.
■ Operated by foot switch
■ Compact and light
工具參數Product parameters：0.25-35mm2
電壓範圍 Voltage range：AC 220-110
出力 Output：2.5T
外形尺寸 Overall dimension：140×220×320mm
重量 Weight：10Kg
FEK-60EM 備有多種樣式的端子壓接夾具可供選購 ( 鉗口選型見第71頁）
Interchangeable crimping dies for selection, see page 71
(1) 預絕緣和插件2合一壓接模具 Pre-plug 2-in-one insulation and crimping
(2) 同軸壓接模具 Coaxial crimping dies
(3) 小銅管端頭壓接模具 Small brass crimping dies
(4) 預絕緣端頭壓接模具 Pre-Insulated terminals crimping dies
EM-6B2 是用於非焊接電氣接線的壓接，具有省力、快捷等優點，是替代手動壓接鉗 選擇，適用截面範圍在 0.25mm2 至 10mm2 之間的冷壓端頭及剪切端子功能。隨機配備 7 套精密的壓線模，可隨時根據需要更換壓線模具，工作效率高、適應性強。
本產品採用定速馬達驅動，無論是在壓接力量上或壓接速度上都具有高效率與高品質的優點，適用於中大數量端子壓接使用，如果所需壓接端子形式多樣的話，更需選擇本產品。
本產品通過 CE 認証，已申請外觀專利。
Type EM-6B2 is an ideal crimper for connection in cabinet.It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu/Al cutting in 7mm. It is supplied with seven kinds of accurate and replaceable die sets.
The crimper has high working efficiency and wide application.
The crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed.
It is good for terminal crimping in large or medium quantity. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.
EM-6B2 備有多種樣式的端子壓接夾具可供選購 ( 鉗口選型見第 71 頁 )
Interchangeable crimping dies for selection, see page 71
工具參數Product parameters：
壓接範圍 Crimping range: 0.25-10mm2
電壓範圍 Voltage range : AC 220/110
出力 Output : 12.7KN
外形尺寸 Overall dimension : 325×265×150mm
重量 Weight : 12Kg
電動/氣動端頭壓接機可選配鉗口 DIE SETS FOR SELECTION適用於 FEK-20M, FEK-06M, FEK-5ND, FEK-60EM, AM-10, EM-6B2
